KAYAK2U

July 11, 2011

Arise. ARISE!

Anyone remember the sunken sailboat I blogged about more than two years ago?  It was in a slough about a mile and a half from here.

More than a year ago, I was out in the kayak, noticed the boat had been raised, paddled closer, found the owner and his wife sitting in the cockpit, and exchanged pleasantries with them.  They were going to refurbish and possibly be seen sailing again, eventually.

Well, their house, sitting on the hill above the sailboat, burned to the ground shortly thereafter.  And then, somehow, over Winter, the boat went over again.  And there it sat, all this year.

Two nights ago, Jay asks, "Can you help me tomorrow?  This guy says I can have his sailboat if I can raise it from the lake bottom.  He's been trying to give it away, and people keep telling him they want it, but then don't show up."

I said, "Dang, I wanted that boat, but didn't know he was finally going to let it go."

Of course, I didn't really want the boat, because who needs another hole in my head.

So, naturally, I went and helped him yesterday morning.  Took us about three hours.

Pixie sunk

Sitting in about four feet of water.
Pixie ropes

Anne shows off her soon to be new boat. Note the lines leading from the mast to the trees.  It took two full cycles of cranking in the come-a-longs, using one to hold while re-reeling out the cable of the other one and resetting the ropes, to pull the boat up far enough to expose the starboard gunwales.
Pixie rolled up

Rolled up, Jay works on starting the gas powered pump.  That's one heck of a water line.
Pixie slime

The cockpit is clear of the water, but the cutout in the transom for the outboard motor is still open to the lake.  We pump away for about fifteen minutes before figuring out that we're not making any headway.  It takes another while, studying eddies inside the boat and sticking our heads in various holes, before we determine that there are big holes (big holes that aren't supposed to be there) in the outboard motor well leading into the rest of the boat.
Pixie floating

We held a board over the motor cutout as a very rude seal, hoping the pump would be fast enough to beat the leaks, and it was. John, the owner of the pump, stopped by to lend advice, but we were pretty well on our way at that point.  The boat, she floats.
Pixie dreams

Anne and Jay packing up their gear before going to get their power boat to provide a tow back to their place.  The sailboat still lists a little as the big pump couldn't get all the water out of the bilge, and there are dozens and dozens of blue gill and bass still down in there, as well as assorted mollusks, and not a little mud and slime.

I think the plan now is to figure out how to get the thing completely out of the water and parked in Jay's yard, where he can work on it at his leisure over the next couple years.  It's a Lancer 28, by the way, and should make a very nice boat.  Of course, the inside is ruined, but there wasn't much in there, anyway.  I figure, even the bulkheads will have to come out.  The sinks might be salvageable, but not much else.

Anyway, after staring at that boat for more than two years, I was tickled to be part of finally getting it out of there.

MikeSoja - July 11, 2011 -- 11:54 am    Filed in: Sailing, Watts Bar Lake  
« Universal applicability
Some pigs are more equal than others »
As Happy As A Clam

Kayak2U.com

msoja RSS 2.0

Other's Pages









Search

Archive

November 2026
M T W T F S S
 1
2345678
9101112131415
16171819202122
23242526272829
30  


  • Books4Sale



    Soja's GoodReads Books4Sale Cheap

  • Category Cloud


  • Tag Cloud