KAYAK2U

June 9, 2011

Shake and Bake

Oy, it was hot yesterday two days ago, as it was hot the day before, as it is hot today, and so on.  Spring mid-nineties, under the relentless sun.

But the wind was blowing, and I really hadn't made a day of it like I should, yet, so I untied, blew the departure horn, waved promises of return to Sweet Cheeks looking and acting demure on the dock, hoisted sail at the end of the slough, and was off.

Had I not been coated in the best in 60 SPF I'd have been toast in short order.  And the big jug of ice water was almost not enough.  There is more to sailing some days than just handling the boat.  Some days out there, you have to contemplate eating your sled dogs.

So, imagine my surprise, some five miles into my journey, ostensibly wide awake and attentive, I suddenly noticed a half mile off, what I should have seen at a mile and a half or more:  a large tugboat pushing two enormous barges in my direction.  While the ensemble was not dangerously close, I was exactly mid-channel of the Tennessee River, under sail, and the wind wasn't blowing with any particular steadyness.  I was averaging a solid 2.1 mph at that point.

Here's the scene… 

Tugboat Bearcat near Half Moon Island

I recognized the tug almost instantly, even hidden behind the barges, because I'd blogged about the same boat at least twice before, once respecting the fact that Bearcat has been involved in three fatalities (two of her captains failed to see small boats in their path, running them over) in the area over the last three years, and because I photographed her working barges through Watts Bar Lock last year.

In the pic above, Bearcat is just coming out of the maintained channel East of Half Moon Island, and beginning to make a starboard turn to follow the river toward Knoxville.  Just before the pic was taken I was heading across the bow (left to right) of the approaching tug.

Distances are hard to gauge on the water.  As it was, had I held course or even heaved to, the barge likely would have turned inside me and missed me by a wide margin, but I judged things otherwise at the time, and tacked back to port, which actually took me back to the middle of the river (as judged in retrospect with the aid of maps and my GPS log).  It's possible that the tug was forced to go wider around than it might have otherwise.  Exciting.

Got to be careful out there.

Later on… 

Osprey Nest

The channel markers make for prime Osprey nesting
Osprey feeding chicks

I think that's the first time I've seen more than just the top of an Osprey chick's head.
barge

Another menace I was forced to dodge in a narrow channel, though I saw and heard this one approaching from more than two miles away.

Track O' the Day, color coded by speed
MikeSoja - June 9, 2011 -- 12:56 pm    Filed in: Catboat, Sailing, Watts Bar Lake  

May 12, 2011

Launch date ’11

Some six weeks earlier than last year… 

Catboat undressed

I had to repaint the bottom again, but sanded only a few patches where, for reasons unknown, the old paint flaked off as Winter progressed (despite looking fabulous when we pulled it out of the water last Fall.) Used a heavier roller this year and put about twice as much paint on her as last year, in the same number of passes. Hoping it all sticks. Discovered the wonders of wax paper between the jack stand pads and the dry but new paint.

Tomorrow, weather permitting (or not), the spars.

MikeSoja - May 12, 2011 -- 10:01 pm    Filed in: Catboat, Watts Bar Lake  

March 28, 2011

Words for the wise

From The New York Times, November 29, 1885 (PDF):  

Catboat drowning machine

The story includes the following helpful advice…

Never jibe a catboat in a fresh breeze when you have ladies on board.

MikeSoja - March 28, 2011 -- 12:12 pm    Filed in: Catboat, Sailing  

February 28, 2011

Lashed to the crosstrees

Via the Cape Libraries Automated Materials Sharing site, a retelling of a rescue by a catboat, 101 years ago:

As the schooner [Mertie B. Crowley] began to sink off the Skiff Island Shoal's, Mrs. Haskell (wife of Capt. Haskell) was lashed to the crosstrees, dressed in her husband's rubber boots, her nightgown and an overcoat, 100 feet above the deck. Eventually the captain and the whole crew would lash themselves to the rigging, jib boom and the main mast crosstrees. Mrs. Haskell was the first to be rescued as Cpt. Jackson and his crew of 4, began their rescue efforts in Jackson's catboat, Priscilla. Because of rough seas, the crew had to rescue each member from the Crowley by rowing to the schooner and back again, one at a time.

Captain Jackson and his crew were honored with a medal from the Humane Society of Massachusetts and the Carnegie Hero Fund for their bravery in saving 14 lives at Martha's Vineyard.

MikeSoja - February 28, 2011 -- 06:06 pm    Filed in: Boating, Catboat  

February 5, 2011

Catboats always land on their feet

They're building a catboat at Marty Harris Furniture (where ever that is), and, with the planking finished on the upside down frame, it came time to flip it all over.  See the "Boat Flipping" video.

MikeSoja - February 5, 2011 -- 07:27 pm    Filed in: Catboat  

November 13, 2010

Catboat pile up

I've been saving open windows for about half a year.  In no particular order… 

The Catboat, from the Rudder, circa 1925:

Theoretically, the cat rig is the most efficient driving sail as well as the simplest to handle. Actually, the sail is of such size, and the mast and spars so heavy, that the handling by a novice is sometimes more difficult than would be the case if the sails were divided up as in a sloop or yawl. In light weather the catboat is a wonderful craft, for the big sail takes advantage of every breath of air and turns it into power. In beating to windward they will sail closer to the wind than any other type. With the wind astern the cat is at its worst. The boom, often longer than the hull, is entirely over on one side, and the rolling of the boat may cause it to dip deep into the sea, even with the topping-lift well set up. With a fluky breeze astern, the catboat man must watch the sail carefully. If, during a lull in the breeze the sail should trip in the water, the boom will come aft to a point where the next puff may get it on the wrong side and send it sweeping across the deck and over on the other hand. When the slack of the mainsheet is taken up, the boom will come to a sudden stop. If there is much weight in the wind, the strain may break the mainsheet, the boom or often the mast.

 When caught out in a rising wind, the careful sailor will first drop the peak of the sail. This quickly reduces the sail area and slows the boat up so that one can reef her. If you wait until the wind has reached too great a velocity, you may find that reefing is too great a strain unless you have plenty of help. This is particularly true when the boom extends a great way over the stern. If reefed in time, a cat is as seaworthy as any boat of its size and shape.

Must have:  The Gaff Rig Handbook:  History, Design, Techniques, Developments, by John Leather.

Pictures of Silent Maid, from a 1928 issue of Sailing Craft.

A Brief History of Catboats

There is no date in the history books stating the launching of the first catboat. However, 19th Century pictures abound and records show an increased number of flat-bottomed, single-sailed boats being put to work on the East Coast. In the 1800s, catboats were used for three purposes; carrying cargo, fishing and pleasure sailing.

Catboats were used in harbors to transport goods from large ships anchored at the mouth of a harbor into the docks at shore. With their sturdy, flat-bottom construction close to the waterline and wide, open cockpit, catboats could be loaded quickly, scoot to shore for off loading and return to the cargo ship for another load.

cat on catboat

Cat on a catboat!  That's Ursula, coaxed on board a dozen times over the course of the summer, but always rightly fearful about things.  Of the other cats, only Olivia even considered coming aboard, and in the end, she couldn't make the leap.  I'm not sure how Ursula would react were the boat surreptitiously untied and pushed off, but I doubt that she would be very happy.

More catboat miscellany from ChesapeakeCatBoats.org.

Find the "center of area" of your four sided sail with Sail Area Math.

See how your boat stacks up in the larger pantheon with Carl's Sail Calculator.

Ezra Klein, the moron, didn't know the word "tiller", and from the depths of his ignorance, lashed out at John McCain for using "tiller" in a metaphor.

Jersey Cats (with many fine pictures to match the text):

A charter cat set out on a great variety of expeditions. Before dawn they would drift out with a flotilla of sneakboxes laden with decoys in tow. The guide would lead his sports to a favored sedge and moor the cat to it sending the sneak boxes out to hide in the reeds. When the hunt was over the cat would tow her charges home, possibly providing a warm beverage in the process. All manner of fishing expeditions were undertaken both for pleasure and profit and at all hours of the day. In the shell fish industry the cats provided a base of operations for a fleet of garveys and some were even built to operate as buy boats. Crabs, bluefish, flounder, shad, stripers, sea bass and numerous other species were to be readily caught along much of the coast. On the way to and fro to these fishing and hunting spots many an impromptu race was undertaken and it was inevitable that more formal contest should be arranged with cabins left behind and rigs tuned to perfection or at least with the sail stretched out as best it could be.

May 17, 1886 – New York Times (PDF):  "Capt. Killmer, of the steam yacht Zephyr, last evening reported the capsizing of the catboat Ada and the drowning of all on board. How many persons were drowned he did not know, and the names of the parties on board could not be ascertained last evening."

languishing on catboat

Sweet Cheeks languishes after a swim, during a lull in a lazy sailing day.

Wish list:  The Catboat Book, by John Leavens.

The Voyage of the Dronningen af Danmark to China in 1742.  The Dronningen af Danmark was no catboat, but ship life in those days was arduous in a way that is difficult to comprehend in these.

yard yacht

Yard Yacht again.  Hauled out for Winter and looking swell.  No signs of the blisters I worked to remove last Spring.  Whew.  She'll need another coat of green in the Spring, but will require only the mildest of prep.

In Defence of the Lugsail Yawl:

Over the centuries these rigs have evolved to be the best suited to a hard working life at sea in small boats. As our boats have a good deal of workboat DNA in them, why would I presume to know better? After hundreds of years and millions of sea miles I’d suggest they’ve been well and truly proven.

A few weeks back someone asked about putting a cat rig on a Stornaway. Here’s why I wouldn’t.

Catboat Mary (1893), with a fabulous picture (Be sure to appraise the hi-res version.)  She ended up abandoned at sea, in a raging gale.  Interestingly:  "Two years ago she was built by Town of Staten Island […]".  I wonder if contributions were voluntary.

MikeSoja - November 13, 2010 -- 09:34 pm    Filed in: Catboat, Sailing  

October 23, 2010

Distance

So that's what I look like!

Wittholz Catboat by Cape Cod Shipbuilding

That's the first picture of Weave sailing ever taken from an external vantage point.  Or at least the first I've been able to get my digital mitts on.  I was just cruising gently along, there.

Photo courtesy of Sweet Cheeks, herself, who just happened to be motoring by.

Beautiful fall day.  Had the sail up for over four hours.  Forty minutes of that I spent basking in the autumn sun, flat out on a bench, with my head on a cushion, staring at the sky, making half a knot, semi-randomly.  And then I spent a couple hours with my feet propped against the opposite bench, heeled over near twenty degrees, the sheet really testing the muscles of one arm and the tiller straining the other.  I may have hit an adrenaline pumping five knots.

Saw a small flock of Coots, out there.  American Coots, at that.

Bonus pic:

Rolling on the river
MikeSoja - October 23, 2010 -- 08:49 pm    Filed in: Catboat, Sailing, Watts Bar Lake  

July 14, 2010

Still rockin’ and rollin’

What a great day, bouncing along in the wind driven convection oven.  Almost four hours of it, with the constant tug of the main sheet on one arm or the other, keeping the tiller pointed with the opposite, cooking in the white cockpit at something over ninety degrees Frankenheit.  There's nothing like it.  When the wind fills that sail, every part of the boat knows it, and then it's just a matter of trying to take advantage of it and keep it under control.  Had a blast.  And I'm still feeling the waves.

sail up

The sail looks more wrinkly (that's sailor technical talk) in the picture than it did in action.  I think the camera accents every little defect, especially across broad swaths of white.  The line the topping lift cuts as it sags across the other side of the top of the sail looks more pronounced than it was, too.  The line was slack, with only the weight of the blocks at the foot of the mast applying any tension.

Still, the sail in the picture isn't demonstrating the classic, powerful, efficient shape that one wants.  Of course, every moment is different out there.  The boat is constantly changing pitch with every wave it encounters, whether such waves are wind driven or arriving randomly off the wakes of the multitudes of power boats.  The wind, too, is usually highly variable, changing direction on a whim, and every puff also changing the attitude of the boat.  And the pilot has his druthers about where he wants to go, how he thinks he's going to get there, etc., and can throw his own weight around to affect things.  Take the hand off the tiller for a minute and everything can go to hell.  There are a whole lot of variables in play.  Going downwind, even the weight of the boom sticking out over the side leans the boat over, calling for a correction with compensating weight, and/or a tiller adjustment.

There are ways of adjusting that sail that I don't bother with.  There are probably aspects I don't even know about.

July 14 2010 track

There's the mad weaving against the wind, all the way out.  I could motor that first distance in nothing flat, but it's fun to bounce off one side of the branch and then the other.

The GPS track is color coded according to the speed of the boat.  The blue tips of every tack show the slowness in turning.  Red is the fastest, with brown next.  Top speed today was 5.5 mph.  You can see where the wind almost died out in the upper right corner, and then gave me a little more, while I decided to head for home.  Fortunately, it slowly picked back up, and I had a nice straight shot, probably three miles, all the way home.  The heat was something else, though, with no apparent wind in the cockpit.

Tomorrow looks like a duplicate of today, only warmer.

MikeSoja - July 14, 2010 -- 09:48 pm    Filed in: Catboat, Sailing, Watts Bar Lake  

June 30, 2010

Sailing, sailing…

Sailed twice today, maybe racking up a mile and a half, total.  I was working the sail/reefing setups and not intent on making tracks, but the winds in the branches and sloughs are interesting.  On certain days, it is almost impossible to sail out of certain narrow channels.  The wind blows off associated peninsulas at different angles than it blows between peninsulas, meaning that one can be trying to sail upwind against two different winds, trying to split them.  Today, I also had the pleasure of no wind, and eventually called it quits to get myself out of the relentless sun rays.

The boat is all set up, now.  Only a couple months behind schedule.

MikeSoja - June 30, 2010 -- 12:16 am    Filed in: Catboat, Sailing, Watts Bar Lake  

June 28, 2010

Ship shape

Operations were delayed on account of some sort of malady that encouraged me out of the heat and into fitful slumbers.  And then company arrived and endeavors had to be woven around and through.  But don't doubt, endeavors were strenuous and extended.

But I had a small sail noonish today, even before some of the ordinarily necessary adjustments were incorporated, even in the stormyish atmosphere.  All went better than swell.

I moved some of the lead ballast around in Weave's navel for a beneficial attack profile, but can't comment yet on the effect on handling.  I think I need more lead.  Lead is good.  Lead is heavier than most other stuff.  I want more of it.  I don't want to pay shipping!

And then I spent actual hours looking around all my various repositories for the little plastic envelopes with the electrical butt joint splicer things so I could finish wiring the mast light to the main boat grid, but never found them, so I wired it up temp like, just to give it a test.

catboat with mast light

The picture was taken near dark, with the shutter staying open for (seemingly) two seconds, but it's not too bad.  (It occurred to me that digital pix tell all.  It was a two second exposure.)

The new LED is all it should be.  The previous incandescent version was a joke, but the new light errs toward the other end, if it errs at all.  It lights up the wind indicator with panache.

MikeSoja - June 28, 2010 -- 11:40 pm    Filed in: Catboat, Sailing, Watts Bar Lake  

June 24, 2010

Re-berthed

At last… 

catboat home

The launch was easy.  More worry than actual sweat.  And it's impossible to do without submerging up to one's neck to crank down the back pads on the trailer, so we were cool.

Tomorrow:  Step the mast, hang the spars, run the rigging, and see if the mice got in the sail bag.

That's the refurbished dock, too.  When we bought the place, the old dock was unsafe, even for the dog to walk on, and the wall at the edge of the lake was starting to lean over.  One old post on that stuff is here.  I put the new dock in the same footprint, but with a higher deck, and extra four by fours, lots of cement, and some beefed up trusses to hold against the wall.  With any luck, it'll outlast me.  I still have to add railings and a long row of hardwood benches where the chairs are now.

MikeSoja - June 24, 2010 -- 08:58 pm    Filed in: Catboat, Watts Bar Lake  

Done

Preparing for naval operations now… 

catboat hull

Not too bad.  A couple of imperfections, but nothing to get het up about.  It's hot enough already.

Might be time to organize that press gang.

MikeSoja - June 24, 2010 -- 11:56 am    Filed in: Catboat  

June 23, 2010

Launch delay

On account of failure to account for adequate paint drying times, and excessive daytime temperatures.

But we're GO for tomorrow afternoon.

catboat with stripe

It turns out that the five dollar stand (2 x 4 with a square of plywood screwed on the end) works almost as swell as the hundred dollar stands. I'll give the red stripe a second coat in the morning, and let it dry until afternoon. While the paint dries, I'll remove the jacks and return the trailer to its level position, add some air to the tires, bolt on the winch (just in case), hang the motor, find some fresh gas, install the tiller (mucho thanks to Sweet Cheeks for applying about six coats of some kind of varnish to the ancient thing), find the anchor and load it aboard along with sundry other accoutrements, and bring the truck around for to play tractor.  The launch vector is just the other side of that house in the upper right corner.

catboat masthead

Meanwhile… part of the long drawn out process was redoing the top of the mast.  The tiny incandescent light barely threw enough light to be seen from below, and the whole ensemble was really just jammed together, antenna wire sticking out, light wires sticking out, etc.  The bracket pointing straight up held the wind indicator, and the smaller bracket held the marine radio antenna.  In these waters, I don't need the permanent radio installation, as my smaller radio works fine, and I'm able to fit the wind indicator to the antenna bracket, so off with the ugly bracket, and away with the radio antenna wire.  I threw a new wire all the way down the mast for the new light, which is a Hella LED, drawing less than 2 watts, and is supposed to be visible for more than two nautical miles, which exceeds requirements AND necessity, too, but will last for years and years.  So, a much cleaner arrangement, with no exposed wires, and quite a few holes plugged with metal alloy.  Sweet Cheeks repainted the upper white portion (she varnished the six mast hoops, too), and the mast is pretty much good to go.  I have some new blocks for the halyards to run through, but they'll go on in nothing flat.

Oops.  I still need to drill holes to mount the cheek block for the topping lift, replacing the broken block (barely visible in the 'before' picture) which was slightly smaller.  Piece of cake.

MikeSoja - June 23, 2010 -- 10:57 pm    Filed in: Catboat, Watts Bar Lake  

June 21, 2010

The cat’s pajamas

In the morning light… 

catboat with ablative bottom paint

The Interlux BottomKote went on smooth as silk, and didn't fall in big sheets onto the grass overnight.

Success!

The stuff really glistens with the morning dew.  Cool as hell, if I do say so myself.

Second coat goes on soon!

MikeSoja - June 21, 2010 -- 08:49 am    Filed in: Boating, Catboat, Sailing  

June 20, 2010

Slow boat

Sailing, sailing, over the bounding lawn… 

catboat bottom primed

Wot a project.  And I've hated it every bit of the way.  But it's almost done.

That's Weave, the Cape Cod Catboat, sitting in her partially dried second coat of bottom primer.  In a few hours, we'll attack with the ablative anti-fouling paint.

It seems like months ago I started sanding that bottom, which was a nightmare in itself.  Just crawling around under that boat gives me the heebie jeebies, especially after I witnessed the unloaded trailer crash to the ground once, when the rusty pin locking the front wheel in place snapped.  What's to say some other part won't snap or sag while I'm under there? 

The auxiliary crank stand I ordered didn't add anything to the safety side of the equation, and wasn't enough to hike the boat the way I needed, so I ended up ordering a pair of real sailboat stands, but it was veritable heck getting them in place.  I ended up tilting the boat and trailer back to make it so.  The blue stand there is half the pair, shoved to one side a little, so we could paint.  In a little while, I'll reposition it, crank it up, and lower the other pad to paint that area.

Blisters, holes, and gouges were filled with a couple different 3M marine filler products, tres expensive, but excellent stuffs.  Primer prep involved cleaning the whole bottom with a noxious solvent wash (I acquired brand new respirators for both Sweet Cheeks and myself, which were used throughout.)  And then the epoxy primer, the Interlux Interprotect 2000E, even more noxious than the 202 solvent, should seal the bottom of the boat nicely.  It has micro-plates!

Next up is the Interlux BottomKote, which will keep the algal blooms at bay, theoretically.  That stuff is pure poison, apparently, until it dries, and then only poisons marine creatures who land on it.  You bet.

So, the boat may end up in the water around about Wednesday, completely missing our lovely Spring.  We have to touch up some of the top side paint, too (we'll leave the major portion of that for another year), and put the red stripe back around at the water line (it's hung up to dry in the laundry room), but those are things we can do standing up, and we like that.

MikeSoja - June 20, 2010 -- 02:28 pm    Filed in: Boating, Catboat, Sailing  

May 29, 2010

Drowned, in the mists of time

Searching on something catboat related and pulled up a couple of old stories from the New York Times.

First one from July 1892, a PDF:

Newport, R. I., July 3. — William and Edward Smith and Edward Stevenson, a guest of the Smiths, all of Philadelphia, started to encircle the island to-day in a catboat.  In cutting through a pass in Brenton's Reef, used only by fishermen, their boat swamped and sank almost immediately.

The occupants attempted to swim through a heavy sea to shore, one mile distant, through water that is full of ragged reefs.  Edward Smith, the youngest of the party, was able to reach shore, but in a greatly exhausted condition, having barely enough strength to crawl up on the steep, rocky shore, where he became insensible and was restored to consciousness by fishermen.  Search was made for the others along the shore, but only pieces of the bow of the boat could be found.

As the summer season kicks off again, today, coincidentally, it behooves to pause and consider the dangers of the deeps.

A similar tale from August 17, 1896, but with hints and clues of the culture that would astound us today.  Follow the story line.  Again, the small PDF:

The first information received in Brooklyn that an accident had occurred came from Richard Wallin of 938 Second Avenue, who had been out in a boat and had picked up a coat, in the pocket of which was a postal card addressed to John Mauer of 41 Woodhull Street, Brooklyn.

Mr. Wallin, on his arrival in Brooklyn, called at the house of Mauer and found that the coat belonged to him, and that he had lost it by the upsetting of the boat.  Mr. Mauer then went to the Fourth Avenue station house, where he gave the particulars of the accident.

He and seven other young men, he said, started yesterday morning on an excursion in a catboat, and they had gone as far as Staten Island, and were about to land, but they changed their minds and went on and then turned for home.  When the boat was off Robbin's Reef in some unaccountable way it was capsized and all were thrown in the water.  Two were unable to keep up and were drowned.  The six others were rescued by a boat and were taken to Hoboken, where they were landed.  They then went home.

They went home?  And never contacted "the authorities" until Mr. Wallin found Mr. Mauer's coat?  Makes eminent sense, doesn't it?  It was an accident, not a crime.  Imagine that happening today.

Relish the agéd newspaper style, too.  They don't write like that anymore, and it's a shame.

MikeSoja - May 29, 2010 -- 12:58 pm    Filed in: Catboat  

December 27, 2009

How to build a wooden catboat…

In about four minutes.  Time lapse Youtube at Wood Boat Building.

Hmm.  They put a Marconi rig on her.  Oh, well.

MikeSoja - December 27, 2009 -- 09:17 pm    Filed in: Catboat  

October 30, 2009

Never before attempted…

… by us.  The ongoing saga.  The day flew by.  We hauled Bob the ski boat out of the water and parked him in the side yard, and then went to work on Weave, our Wittholz designed, Cape Cod Shipbuilding built catboat (one of two built in 1976.)  Yesterday, we pulled the mast.  Today, we wanted to put it on its trailer, something, like the mast pulling, we’d never done before.

Captain Sweet Cheeks

Captain Sweet Cheeks heading out through Turtle Alley.  Ya gotta love them turtles that get out there so late in the season.  There are about eight of ’em in that picture.

Cape Cod Catboat with fixed keel on trailer

And before ya know it…  

We had no idea how the boat would sit on the trailer, or even if it would.  We bought boat and trailer as a set, but hadn’t yet ourselves put them together.  Over the summer, I cleaned up the trailer, replaced the keel board and pads, and gave it a new winch, but none of that informed as to how the trailering act would work.  Neither of us had ever trailered a sailboat.

The trailer has an extendable tongue so that the trailer can be backed farther into the water than would be necessary for a boat with no keel, and the extending and retracting of the tongue requires extra effort and diligence in the midst of the trailering process.  But it all went off without a hitch (so to speak).  Admiral Sweet Cheeks, fighting a cross wind, drove the boat precisely up the middle and landed on the pads nicely.  The winch cranked ‘er in almost effortlessly.  I had to enter the icy depths to crank the aft pads up against the boat’s bottom, but while the water was cold, the air was warm, and the driver’s seat in the truck has been drenched before.

The picture above was taken just after we hosed and brushed the undersides free of most of the gunk there.  It cleaned up surprisingly well, and there’s more of the anti-fouling paint left than I had any reason to believe would be.  I spent a long time eyeballing the bottom, as I’d never seen it before.  Of particular interest is the sort of "wing" that the previous owner added to the bottom of the keel, any ostensible reason for it escaping me at present.  I’m not sure I like it.  And it sure is different than I imagined it to be from groping it underwater. 

By the way, that’s the fixed keel version of the Cape Cod Shipbuilding catboat, pictures of the bottom of which the Internets have been loathe to cough up.  Nor have I been able to find pictures of any boat on that particular trailer rig.  If anyone is in a similar situation and needs pix, let me know.  I’ve got a lot of ’em, now.

catboat art

 

MikeSoja - October 30, 2009 -- 10:10 pm    Filed in: Catboat, Watts Bar Lake  

October 29, 2009

Nice winch, plus: For the record

This was one of the days the year pivots around.  We un-stepped the mast in ol’ Weave, the catboat. Since it was the first attempt ever (never even seen it done), the lead up was fraught with consideration and planning, while the actual act itself took about twenty seven seconds.  Perhaps I over-prepared, but I had no way of knowing that the whole twenty five feet and nine inches of aluminum mast would weigh much less than a hundred pounds.  Sweet Cheeks and I carried it easily after it was down.

But here’s how it goes, for future reference. 

First, be sure to order a Dutton-Lainson Winch with Automatic Brake — 800-Lb. Capacity, because you’ll find many uses for it.  Mine will float between mast steppings and the boat trailers.  And it’s like magic.  Crank it one way and it reels in.  Let go and nothing happens.  Crank it in reverse and your cable pays out.  No balky levers, no rusty springs.  Just crank it one way or tother.

Then figure out how to mount the winch to yer twenty four foot extension ladder.  It took me about three hours to rig up a reusable base, but it was way overkill, and I’ll have to knock it down to something lighter and easier to mount.  But I digress.

The dock:  Screw heavy board to dock.  Fix pulley to *top* rung of extension ladder using blue anchor chain and half inch rod through the clevises on either end of the chain.  Walk extension ladder to vertical and bolt to board.  Tie main lines to third rung of sliding extension.  Tie side lines to top rung of base ladder.  Set the pitch of the ladder and secure all lines.

The boat:  All rigging that can be removed is removed.  Boom, gaff, likewise.  Bungie lazy jacks to mast.  Mast hoops can hang, but might be secured, too.  Loosen mast boot and raise it a little, and re-secure.  Unscrew turnbuckle on mast forestay, bungie hanging forestay to mast.  With line that will wind around winch drum, tie loose bowline around mast.  Tie another line to that loop (use a bowline, again), leave twelve or more feet and tie another bowline to the bracket that holds the boom.  Pull first bowline up the mast until lower line taught, then thread line through pulley and down the ladder.  Send extension up to desired height.  Adjust pitch and secure lines as needed.

Attach winch to ladder.  Attach line to winch drum and take up slack.

Remove bolt from bottom of mast.

Knock out mast wedges, and hoist the mast clear, controlling lower end.  Lower away, at leisure.

catboat with no mast

That’s it.  And how do ya like our end of Rocktober foliage, eh?

MikeSoja - October 29, 2009 -- 08:26 pm    Filed in: Catboat  

October 16, 2009

“the show that never ends”

Have the pols lowered the cost of health care, yet?  I’ve been contemplating offering bets of $500 or a $1000 that health care costs won’t be any lower in ten years than they are now (absent a complete collapse of economy and government), so if anyone is interested, drop me a line and I’ll figure out a way to weasel out of it.

Today was a day.  When I went to bed last night, the lake water was a little high, but not anything to worry about, after a couple solid days of rain.  I woke up to find the water had risen over the dock, with the sailboat in danger of bumping the bottom of itself where no bumper could protect it.  I cut the electricity to the dock, sloshed through the shallows in my sandals (the water wasn’t too bad, though the air was about fifty degrees), and deployed anchors to hold the boat off that which it is usually beside.  We kept an eye on the neighbor’s pontoon boat, as its canopy got closer and closer to the roof rafters above it.  The waters have yet to recede more than an inch or two, and may actually rise again over night.  The TVA is playing with the people’s generators down at the dam.

catboat at anchor

Here’s how it looked two and a half weeks ago when the water was almost even with the dock, some four inches shy of where it was today. Note the anchor off the stern, too, but plowed into the muddy bottom like an anchor should be.

And then we tore the kitchen apart.  We’re doing it methodically, don’t you know.  Some cabinets are gone from one end.  Some floor is ripped up.  Tomorrow a four by eight goes down, and then some more stuff gets ripped out, etc.  Still need to buy insulation and some quality snap together mostly wood flooring.  And some more two by sixes.  New cabinets arrive next Wednesday.  It’ll be tight.

I also spent some quality time on the roof, where the view really is stupendous, trying to ferret out the newest rainwater entry point, not having much luck.  I put down a strip of that lovely peel n’ stick aluminum adhesive backed stuff* (You’d know the brand name in a heartbeat, but I don’t want to attract the attention of the fucking morons at the FTC) in a semi-likely spot, but will certainly have to pursue the matter further on some other day.  Must purchase bucket o’ tar, tomorrow, check.

In bird news, I didn’t see the Black-crowned Night Heron today because the dock it has taken to was under water all day, but it’s been on that dock every other day this week, where it catches and swallows fish after fish.

And that’s the way it is, whatever day it is.

XOXOXXO

*It’s Peel & Seal Self-Stick Aluminum Roll Roofing, and no homeowner should be without some.

MikeSoja - October 16, 2009 -- 11:16 pm    Filed in: Avianics, Catboat, Projects  

September 6, 2009

Bon Voyage

There’s about a 120 mile hole in the storm systems, which ain’t nearly enough, but we’re going gunkholing, anyway.

Got a bucket of blood, some shrimp/ham/pineapple kebabs (pre-charred), rice, veggies, and a weather eye.

Pray the anchors hold.

The next day:  Plans changed.  The other parties to the party saw the big moving radar blobs headed this way and chickened out.  We tried to sail up the lake anyway, but the wind died, and obnoxious people in motor boats kept circling us, causing us to rock and roll without music.  We returned to home port and shared food and stories under lifting skies.  There was the barest of rain sprinkles overnight.  Forecasting is still a game of probabilities.  Barrels of grog are always a sure thing.

MikeSoja - September 6, 2009 -- 03:31 pm    Filed in: Catboat, Watts Bar Lake  

August 19, 2009

WWJD?

I think the parable has been used in the same way before, but it’s new to me with the WWJD? tag.  Alá Cato: 

There was a man (M) going down from Jerusalem to Jericho who needed health care (Luke 10:25-37).  All bypassers were free to provide for him or keep walking.  The Priest (P) and the Levite (L) used their freedom in one way and the Samaritan (S) used his the another way.

WWJD?  He said do what S did.  (M’s quality of care was outstanding.)

WWJND?  He did not say that S, P, and L should agree on the level of care and funding for M and chip in.

There’s more, so if yer interested, have a gander.

As an almost completely unrelated aside, I recently had to be told what WWJD expanded to.  I’d nearly finished carving a piece of teak for the sailboat’s new boom crutch and needed a piece of leather to glue to the top of the thing to cushion the boom.  So Sweet Cheeks and her daughter stopped in at the hobby shop in town and came back with a couple of possibles, one of which was maybe some kind of wrist band or small dog collar that snapped closed, emblazoned with a nice big WWJD on one side.  It wasn’t clear to me, so I asked, and was told.  It was funny.

After some small deliberation, considering the fact that the WWJD strip was exactly the width I needed, I cut the snap ends off and super glued the thing in place, script side up.

For what it’s worth, and maybe there’s a further parable that could be exploited to some nefarious gain, the first thing we do now when we are set to commence sailing is to take the boom off the crutch and throw the latter into the cabin with a quiet, "Jolly Heezus".

No disrespect meant.  None taken.

MikeSoja - August 19, 2009 -- 11:33 pm    Filed in: Catboat, Commies, Health care  

August 8, 2009

Catboat!

We found another catboat on Watts Bar Lake.  That makes us and them.  We were over at Blue Springs Marina about a month ago, looking for some ballast for Weave, and in addition to some glib runaround (and no ballast), we were pointed to a new resident of E Dock:

Marshall 22 catboat

It looks to be a Marshall 22, one of the more popular brands (and sizes) of the catboat breed. At five feet longer than our catboat, it’s about three times the displacement, and probably pretty roomy below decks.  It looks slightly neglected, but someone has invested in all new rigging.  Apparently, it’s under new ownership, and was brought up from Florida in the bargain.

We’d love to see the thing out sailing, but we motored over to Blue Springs Marina again two nights ago and could tell that all the lines were tied exactly as they’d been a month ago.  Additionally, the boat is now listing to starboard a little.  I hope it’s just a little rain water, and not a leaky bottom.

Anyway, if that catboat ever heads out and gets tired of seeing nothing but skinny, boring sloops around, head on over toward Arrowhead Marina & Resort.  We’re the first sailboat past there, on the right.  If we’re not already out on the water, we can cast off in about ten minutes.

Relatedly, I recently stumbled across the following sorrowful lament about sailboats in general and catboats in particular.  From Harper’s Magazine of 1877.  Yep, a relevant article 132 years old.  An excerpt:

There is one source of danger to which a catboat when running dead before a fresh breeze must necessarily be exposed. It is that of rolling the end of the boom under. A sloop, if the necessity occurs, can scud under her jib alone; but the catboat, having but one sail, must keep that set in all circumstances in which a sail is needed. Now when the boom is at right angles to the line of the keel, as it is when the wind is directly astern, the rolling of the boat is very apt to dip the boom into the water. When it is dipped to a certain depth, a capsize becomes inevitable. No seamanship can do away with this danger. It springs from the inherent viciousness of the cat rig, and no care or foresight can provide against it. Occasionally the boom, instead of rolling under, “kicks up,” as the phrase runs, and is wrapped close to the mast by the sail. The boatman, if he is a sailor, can usually extricate himself from a difficulty of this kind by one or another expedient; but if he is merely an awkward amateur, as is usually the case, he abandons himself to despair, and gloomily wonders where his body will be found, and whether it will be swollen to an unrecognizable extent.

The whole thing is hilarious like that.

MikeSoja - August 8, 2009 -- 04:13 pm    Filed in: Catboat, Watts Bar Lake  

June 4, 2009

Sky Hooks

The wind indicator disappeared off Weave’s mast sometime over the winter, and how to get a new one installed absorbed quite a chunk of my drifting-off-to-sleep thought cycles over the early part of the year.  The local sailboat jockeys across the lake want $69.95 an hour to perform even the littlest of chores.  Loosen one nut, and tighten a new one?  Forget about it.  But how to get up there?

To make a long story short:

ladder act

Nope, that twenty four foot extension ladder is not leaning against the mast, though I sure did have my arm wrapped through and around both of them, but I pulled the mast over to me when I got up there.  

I was all psyched out for it, but I started up that contraption, got about to the level of the dock roof, and panic set in.  I looked up to where I had to go and my heart sank.  So I sat on the roof, and Sweet Cheeks wandered off to let me search my soul at my own speed, and about a minute later I put the fears behind me and climbed up like nothing.  It wasn’t so bad.  I went up twice, got the indicator installed with no problems, and checked out everything aloft while I was at it.

The thing really was rock solid.  Moreso than putting the same ladder up against a gutter on the house and climbing it.  First, I bolted the ladder’s feet to the dock.  Then I ran two stout lines from the second rung down back over the roof of the dock in an acute ‘V’, tying one to a cleat and the other to a tree, and they controlled how far the ladder leaned out toward the boat.  About five rungs down I tied another pair of lines to restrict any sideways movement, which also added the benefit of keeping the ladder from falling backwards.  And that was it.

I figure I’ll be able to use a modification of the setup in the fall to hoist the mast out of the boat, so I can trailer the thing for to work on (paint) at my leisure.

Relatedly, an American Spectator piece, titled A Ladder to Nowhere, on the economic idiocies from which our elected officials dangle.

MikeSoja - June 4, 2009 -- 12:20 am    Filed in: Catboat, Projects, Sailing  
  1. Pages:
  2. 1
  3. 2
As Happy As A Clam

Kayak2U.com

msoja RSS 2.0

Other's Pages









Search

Archive

November 2026
M T W T F S S
 1
2345678
9101112131415
16171819202122
23242526272829
30  


  • Books4Sale



    Soja's GoodReads Books4Sale Cheap

  • Category Cloud


  • Tag Cloud